ZACHVO ZA-WPH-1, Инструкция по эксплуатации

Страница: 7 / 8

REMOTE CONTROL INSTRUCTION
OPERATING
Product Key Function:
1. Turn ON/OFF the power
2. Press key function: press the button, then press the heat levels (L1-L2-standby - off)
Noted: All SUNDEAR heaters and their remote controls have the same frequency, so it is possible to
control several heaters with just one remote.
PUSH BUTTON: on the right of heater, it could be manual operated without remote control.
Inserting Batteries (not included)
Insert 2 AAA/ Alkaline type batteries into your remote control
1. Flip the backside of your remote control and pull out battery cover. Insert the batteries in accordance
with the instructions and polarity the batteries.
2. Change the batteries in the same way depicted above.
FUNCTION & OPERATION
1. PLUG the unit into a plug socket, make sure the power supply is the same as rated
2. PRESS the power button on the right side of heater
3. TURN ON the heater by remote control, or off the heater
4. DOWN & UP BUTTON, setting the power level
CLEANING AND MAINTENANCE
Regular and careful cleaning helps your infrared heater operate efficiently for many trouble free years. To clean your heater
follow steps below
Unplug the power cord for your safety before cleaning yourappliance.
1. Make sure the heater is cool before continuing
2. To keep the heater clean, the outer shell maybe cleaned with a soft, damp cloth. You may use a mild detergent if necessary.
After cleaning, dry the unit with a soft cloth. (CAUTION: DO NOT let liquids enter the heater)
3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean the heater. This may cause damage
or deterioration to the surface of the heater.
4. DO NOT immerse the heater in water
5. Wait until the heater is completely dry before use.
Storage: Store the heater in a cool, dry location when not in use to prevent dust and dirt build up. Use packaging carton to store.
Remote Control Function
Button Function (Heater On) Function (Heater Off) LEDDisplayon
Heater
O Turns heater on or off
I Power setting Turns heater on to
Level1(50%*power)
II
Power setting
Turns heater on to
Level 2 (100%*power)