5
OPERATION
1 Select a station
A Tuning in
Click BAND key for band selecting. Click UP or DOWN key for tuning step by
step (FM: 50kHz/step, AM: 9 kHz/step). If keeping UP or DOWN pressed down for 1 second, it will
search continuously until a station tuned in or don
’
t in 30 seconds.
B Calling out
Click BAND key for band selecting. Click one key of M1~+10 for calling
out a station which stored in M1~M10. Press down M+10 key for 1 second with CH1_ appears on the
VFD screen, and then click one of M1~M9 for calling out the station stored in M11~M19. Press down
M+10 key for 2 seconds for calling out the station stored in M20.
2 Save a station
A Save with auto search
Click BAND key for band selecting. Click AUTO key with the
symbol
“
AUTO
”
flashing on the VFD screen, and then click UP or DOWN key for starting to search
station from the lowest frequency to the highest frequency of the band or in reverse order. The stations
received will be saved into the memories from M1 to M20 until searching to the end of the band or all
memories filled up. The station stored in M1 will be called out when AUTO SEARCH comes to the
end.
B Save manually
Click MEMO key with the symbols
“
MEN
”
and
“
CH_ _
”
flashing on the
VFD screen. Click one key of M1~M+10 as the way mentioned in section 1
·
B for memory selection
and then click MEMO key once again to save the station received at present into the memory selected.
The screen will resume to receiving mode when done.
3 Mono/Stereo switching
Click MONO key in circle for switching between Stereo Mode and Mono Mode of the receiver.
Stereo Mode is for FM only. The stereo function will be activated automatically with the symbol
“
STEREO
”
flashing in Stereo Mode while the FM stereo signal is strong enough. But the S/N of
Mono Mode is better than that of Stereo Mode.
4 Remote with compute link
This set can be controlled by a program manager of ZABKZ-PA series (or DSPPA-MP series and
DSPPA-MAG series) via a link cord. For this purpose
，
fit a link cord from the Remote Link port of this
set to the link port of the program manager. We can use the manager to make programs or timings for
this set.
