Zaber Technologies Inc. NA Series, Руководство пользователя, Страница: 3 / 18

1 ZABER TECHNOLOGIES INC.
1. Disclaimer
Zaber's devices are not intended for use in any critical medical, aviation, or military applications or
situations where a product's use or failure could cause personal injury, death, or damage to
property. Zaber disclaims any and all liability for injury or other damages resulting from the use of
our products.
2. Precautions
Zaber's motion control devices are precision instruments and must be handled with care. In
particular, moving parts must be treated with care. Avoid axial loads in excess of the rated thrust
load, axial and radial impact, dust and other contaminants and damage to the leadscrew thread.
These will reduce the performance of the device below stated specifications.
3. Installation
You can mount the NA actuators by the cylindrical mounting shank or by the four mounting holes
on the square body section. See the NA web page for dimensions, resolution and other details.
4. Operation
This unit is designed to be controlled with any of Zaber's X-Series or A-Series Stepper Motor
Controllers. Units produced before July 2012 with the round Minidin connectors are designed to
be controlled with the older T-MCA series chopper drive controllers. Zaber's controllers and
peripherals are designed for ease of use when used together. Optimal settings for each
peripheral (such as the default current, speed, acceleration, and limit settings) can be loaded by
setting the peripheralid (T:66) on the controller. The peripheral ID is listed as the ID on the
peripheral's label. A list of IDs is also available on the ID Mapping page. For more information on
device operation, refer to the controller's user manual.