Z A A Z | U S E R M A N U A L 5
Z A A Z | U S E R M A N U A L 4
7.
Put the left long handlebar onto the top of
the post. Attach loosely with the long bolt by
first feeding the bolt through the hole in the
top of the arm and then lining it up with the
hole in the top of the post. Connect bottom of
left arm to the base. Tighten the screws loosely.
Then assemble the right handlebar the same
way. Tighten the top bolts and bottom screws
snugly.
9.
Remove the screws from the underside of the
console and attach to the top of the post. As
you attach to the post, feed the cable down the
centre of the post so you don’t pinch the wires
when you tighten the screws.
11.
To use the body fat measurement function,
remove the protective plastic film from the
sensors on the handles.
13.
Place on level surface, and if necessary.
level the machine with the 2 adjusting feet at
the base.
12.
Connect the plug to the power outlet, and
press the red switch on the power button on
the back of the base to turn on the machine.
NOTE
Re-Tightening of screws and bolts may be
required every 3-6 months, depending on use.
8.
Attach the 4 cables from the underside of the
console to the 2 from the curved handles and
the 1 from the centre of the post.
10.
Tighten all screws and bolts snugly.
