X
Mist Button
Press once: Continuous mist with slow fan speed-
Humidifier and cooling function
Press again: Intermittent mist with slow fan speed-
Humidifier and cooling function
Press again: Mist off
Press again: Function sequence repeats
Fan Button:
Press once: Low fan speed - Cooling function
Press again: Medium speed - Cooling function
Press again: High speed - Cooling function
Press again: Off
Press again: Function sequence repeats
Mood Light Function
Press once: Blue light on
Press again: Light off
Press again: Function sequence repeats
Blue light blinks 5 times:
Water tank is empty, add water and press
the mist control button
Red light blinks 5 times:
Water tank is empty, add water and
press the mist control button
Mood Deluxe Model Light Function
Press once: Night Blue light on
Press again: Light Blue light on
Press again: Aqua light on
Press again: Apple Green light on
Press again: Purple light on
Press again: Mood Light off
Press again: Function sequence
repeats
1. Remove the water tank by detaching it from the main body, as illustrated.
Fill with water up to Max level mark (approximately 12mm / ½” from the top).
Attach the main body to the water tank, as illustrated.
When the water tank runs out of water the ultrasonic mist maker will stop working
and the mood light will blink 5 times.
2. Position Zaahn Ultra Chill
TM
on a flat surface. Plug the Micro USB into the unit
and plug the other end of the cord into any USB outlet (5V, 1.0-2.0 A), or for
Deluxe model (5V, 1.5-2.0 A)
All Functions: Mist, Fan and Mood Light are in Stand By Mode.
HOW TO USE
NOTE:
When charging, the mood light will appear in blue and change from dim to
bright slowly and continuously. Blue light will turn off once unit is charged.
NOTE:
Zaahn Ultra Chill
TM
is an evaporative cooler. This type of cooler works
better in a dry climate. High humidity conditions decrease the cooling
capability of evaporative cooler.
4. Use the Multi-Directional grills to adjust airflow
to your preferred position.
5. Charge the battery:
(Deluxe model only) Connect the
micro USB into the unit and plug the other end of
the cord into 5V/1.5 -2.0A USB charger.
Charging time is approximately 3 Hours.
Rechargeable battery is not replaceable
Stop Function: Press and hold any button
on the control panel, all functions including
Mist, Fan and Mood Light will STOP.
IMPORTANT!
Before use let the Water Sponge absorb water for at least
1-2 min after filling tank. If device still doesn’t emit mist, it is recommended to
remove the water sponge as explained and soak it under cold running water.
See HOW TO REPLACE WATER SPONGE section.
3. How to use Control Buttons
NOTE:
While it is possible to use tap water, preferably filtered, it is recommended that
distilled water be used, especially in areas with hard water. If you use tap water in
your device you will need to periodically clean the ultrasonic disc as explained in
the Maintenance section.
USB
Do not add essential oil into the water tank, to avoid
damage in the device
!
CAUTION
Max
Max
Max
