8
CONFIDENTIAL
DOC-USR-0126-03
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
Figure 3 Cable insertion precautions from Hirose datasheet
3.0
USING ONVIF RS-485 PELCO-D PTZ CONTROLS
3.1
ONVIF Device Manager
3.2
Com2TCP Setup
1.
Before proceeding confirm that on the
Term
tab of the Z3 Unit, the
Baudrate
is
configured for the
Baudrate
of the PTZ arm or device connected to the RS-485 port.
2.
If you have not already done so, install the Com2TCP application onto your PC.
(Windows 7 is recommended. For Windows 8 or 10, verify you are using v1.4.6.)
Com2TCP is an application supporting remote access and is available online.
3.
Launch the Com2TCP application.
4.
Set the
Remote IP
field to the IP address of your Z3 Unit. This can be found using
ZFinder or as the URL of the web browser with the user interface open.
5.
Set the
TCP Port
to
2000
. This value must match the
“Local Port”
value listed in the
Term
tab of the Z3 Unit user interface.
