Z3 Technology Z3-HE4K-01, Руководство пользователя

Страница: 8 / 27

8
CONFIDENTIAL DOC-USR-0056-02
____________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N. 8th St. STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
6.0 RUNNING THE Z3-HE4K-01 4K ENCODER
To encode 4K video, complete the following steps:
6.1 Prepare the 4K source
(1) Set the video source to 4K2K30 (3840x2160 at 30fps) and connect an HDMI 1.4 cable to it.
-29.97, 25, and 23.98fps also supported.
6.2 Connect the Z3-HE4K-01
For these steps, please refer to
Figure 4
.
(2) Take the HDMI 1.4 cable from step (1) and connect it to HDMI In on the Z3-HE4K-01.
(3) Connect an Ethernet cable to the Ethernet jack on the Z3-HE4K-01. Connect the other end of the
Ethernet cable directly to a PC. You will use this PC to control the Z3-HE4K-01.
(4) Take a USB 3.0 drive that the encoder will write to and connect it to USB1 (the top USB port). USB
3.0 is recommended to ensure that it is fast enough to write the encoded data.
* Note: The drive must be formatted in either FAT32, NTFS, VFAT, EXT3, or EXT4 format. exFAT is
not currently supported.
(5) Connect the 12V power supply.
(1) Connect Video Source
to HDMI In
(2) Connect
Ethernet (3) Connect to
USB1 (top)
(4) Connect to
12V power
Figure 4 Encoder Connections for Z3-HE4K-01