Z3 Technology Z3-DM8169-APP-L1-RPS Скачать руководство пользователя | Manualshive

Страница: 7 / 46

background image

CONFIDENTIAL

Z3-DM8169-APP-L1-RPS V2.01.10

___________________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

th

ST, STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

7

3.

Untarring and Building the Sample Code

3.1 Preparing the Linux Environment

Prior to building the Z3 sample code, certain modules are required. In Ubuntu 10.x or later, the following
command can be used to get the required modules:

sudo apt-get install bison flex mtd-utils liblzo2-dev uuid-dev zlib1g-dev

libpcre3-dev autoconf autoconf-archive automake automake1.9 automake1.9-doc
libtool libtool-doc

In Fedora, the command would be:

sudo yum install bison flex mtd-utils mtd-utils-ubi lzo-devel libuuid-devel

pcre-devel automake automake17 automake14 autoconf libtool

If you are running a 64-bit OS, it may be necessary to install some 32-bit libraries for the cross-compiling
toolchain. You can determine whether your OS is 64-bit by using the “uname –p” command. A 64-bit OS
will return “x86_64,” while a 32-bit OS will return “i386”, “i586”, or “i686”.

For 64-bit Ubuntu, you can get the necessary libraries by typing:

# sudo apt-get install ia32-libs

For 64-bit Fedora, you can type:

# sudo yum install glibc.i686

3.2

Making the Directories and Running the Make Script

The software provided will allow you to re-create the pre-installed software of the Z3-DM8169-L1-RPS
starting from the included source code.

On a PC running Linux, create a directory where the released materials are going to be located:

# mkdir /home/z3/z3-netra-rdk

Copy the released tar archive to that directory (note: the name may slightly vary).

# cp SW-7R2-00199-01_DM8169-APP-L1-RPS-SRC-20140409.tar.bz2 /home/z3/z3-netra-rdk

Untar the archive (name of tar file may slightly vary. Untarring will take 5 to 10 minutes).

# tar -xvjf SW-7R2-00199-01_DM8169-APP-L1-RPS-SRC-20140409.tar.bz2

Then go into the directory just created and run the build script (directory name may slightly vary):

# cd z3-netra-RDK-20140409

# ./makeall

Note: Building can take around 30-40 minutes. You will also need to type in the sudo password a few
times toward the end of the build.

The outcome of the build process should be newly created image files in the images directory.

«
...
5
6
7
8
9
...
»

Содержание Z3-DM8169-APP-L1-RPS















































Отзывы:

Нет отзывов

Похожие инструкции для Z3-DM8169-APP-L1-RPS

Бренд: Samsung Страницы: 11

Бренд: Adobe Страницы: 822

Бренд: I.R.I.S. Страницы: 182

Crown Print Monitor+

Бренд: Konica Minolta Страницы: 28

Бренд: Cabletron Systems Страницы: 92

Бренд: Denon Страницы: 2

Бренд: Acroprint Страницы: 2

VSHIELD APP 1.0.0 UPDATE 1 - API

Бренд: VMware Страницы: 144

RAPTOR 2500T-DL - RAPTOR OPENWINDOWS FOR SOLARIS INSTALLATION AND

Бренд: Tech Source Страницы: 2

Бренд: FieldServer Страницы: 51

Бренд: Darim Страницы: 8

Бренд: Bay Networks Страницы: 140

COLDFUSION MX 61 - CONFIGURING AND ADMINISTERING COLDFUSION...

Бренд: MACROMEDIA Страницы: 168

MEDIASTUDIO PRO 8.0 - SMART COMPOSITOR...

Бренд: Ulead Страницы: 308

Бренд: Campbell Страницы: 24

Бренд: Lenovo Страницы: 2

ThinkStation C20

Бренд: Lenovo Страницы: 4

Бренд: Lenovo Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды