CONFIDENTIAL
Z3-DM8168-PCI-RPS
___________________________________________________________________________________________
V1.1
Z3 Technology, LLC ♦ 4701 Innovation Drive CB103 ♦ Lincoln, NE 68521 USA ♦ +1.402.323.0702
7
Figure 1
The video source must be a NON-HDCP source for the HDMI input to work properly. We use a Brite-View
media player model BV-5005HD Mini CT. You can find more information about the Brite-View at
http://www.brite-view.com/cinematube.php
. There is no such restriction for the analog YPbPr (or RGB) input.
The System can be controlled via serial port on Z3-DM8168-APP-2x.
1.
Plug-in serial cable
and NULL modem connector
from Z3-DM8168-APP-2x to PC’s COM port.
*The console port is the 2.5mm jack next to the power switch. Please refer to
2.
Setup teraterm on PC for 115k, 8, N, 1, 0ms/char, 100ms/line.
3.
Connect the power supply and a USB pen drive with video content to the Brite-View Box.
4.
Connect the HDMI output of the Brite-View Box to the HDMI input of a TV monitor and set the
player’s display resolution to 1080p60.
5.
Start the Brite-View box play back of the video content from the USB pen drive, optionally in a loop.
6.
Disconnect the HDMI output of the Brite-View Box from the TV monitor and connect it to the HDMI
input of the Z3-DM8168-APP-2x.
7.
Connect Ethernet from Z3-DM8168-APP-2x to a PC directly or through an Ethernet switch.
8.
Set the PC’s IP address to 192.168.1.110 – This is the default address the Z3-DM8168-PCI-RPS
streams to.
Power
Power Switch
Console
GigE
SATA
USB
HDMI In
Analog
Video In
HDMI Out
