8
CONFIDENTIAL
DOC-USR-0049-03
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
2.0
QUICK START GUIDE
2.1
If You Have Received a System from Z3 with the Software Preloaded
To start working with the encoder, you can go straight to Section 7.0, “RUNNING THE ENCODER,” on
page 14. Using the decoder is described in Section 8.0, “RUNNING THE DECODER” on page 25. Finally, a
summary of each parameter that can be configured in the GUI is given in Section 13.0, “SUMMARY OF
OPTIONS,” on page 42.
2.2
If You Already Have a System from Z3 and Need to Update the Firmware
You can update the firmware via the web GUI interface by following the instructions in Section 12.1,
“Method 1: Updating the Image File,” on page 34.
2.3
If You are Ready to Start Development
Details on how to untar and build the code can be found in Section 5.0: “UNTARRING AND BUILDING THE
SAMPLE CODE,” on page 11. A brief overview of the code itself can be found in Section 6.0: “CODE
OVERVIEW” on page 13.
Details on how to set up your system to access the code you have built can be found in Section 12.0:
“RUNNING THE CODE YOU BUILT ON THE BOARD”, on page 34.
