15
Z3
C
on
fid
en
tia
l
DOC-USR-0269-08
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
10.0
KEL CONNECTIONS
10.1
KEL Cable Warning
If
you intend to use your Q603’s KEL connections
, you will need to connect it to your chosen Sony
camera block. The Q603-10 assembly has two 30-pin KEL connectors that allow a flexible ribbon cable to
be used to connect the encoder assembly to an identical connector on a 4K or HD Sony block camera.
WARNING: If a 4K KEL camera is plugged into the HD KEL connector on the Q603 it will
destroy the Q603 and the camera. This is also true if a HD KEL camera is plugged into the 4K
KEL connector on the Q603. These actions VOID warranty.
Figure 7 KEL Cable Connection Warning
10.2
KEL Connection
(1)
Connect the KEL ribbon cable to the Sony block camera. (Gold teeth face up)
(2)
Connect the other end of the KEL ribbon cable to the Interface Front PCB. (Gold teeth face away
from PCB’s)
WARNING: Only use a Z3 app
roved KEL ribbon cable to connect Z3’s boards to the Sony camera.
Using an incorrect cable (the cables provided by Sony) can permanently damage the boards or
camera.
The KEL cable is sold separately. Ordering part number: CBL-0028-01
