Z3 Technology MVPR-02 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 31

Z3 Technology MVPR-02 Скачать руководство пользователя страница 9

CONFIDENTIAL

DOC-USR-0027-07

___________________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

th

ST, STE 250

♦

Lincoln, NE 68508-1369 U.S.A.

♦

+1.402.323.0702

9

GETTING STARTED AND RUNNING THE Z3-MVPR-02

For this demonstration, you will need: a computer, a 1080p/1080i video source, a Z3-MVPR-02, a 12V power
supply, an HDMI cable, and at least 1 Ethernet cable.

To use and run the Z3-MVPR-02, please follow these steps:

Figure 4 Z3-MVPR-02 Demo Connections (Back)

5.1

Setting up the Video Source

Select an HD source with HDMI non-HDCP output (in Z3’s testing, the Brite-View BV-5005HD is used).

-Power on the HD Source

-Connect an HDMI cable from the HD Source to a monitor

-Set the HD Source to 1080p or 1080i output

-Select and begin playback of the content

If you see playback on the monitor, you’ve confirmed the source works. Now move the HDMI cable from

the monitor to “HDMI In” on the Z3-MVPR-02 so that the cable runs from the HD Source to the Z3-MVPR-
02 (see

5.2

Connecting the Z3-MVPR-02

Connect an Ethernet cable to “Ethernet” on the Z3-MVPR-02 (see

). Connect the other end

of the Ethernet cable directly to a PC. You will use this PC to control the Z3-MVPR-02 and to
decode the output stream.

Connect the 12V power supply to “+12VDC” (see

).

(3) Connect

Power

(2) Connect

Ethernet

(1) Connect

HDMI In

«
...
7
8
9
10
11
...
»

Содержание MVPR-02
































Отзывы:

Нет отзывов