HE265-DEC User Instructions
DOC-USR-0137-01
12
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
i.
There must ONLY be one copy of the firmware on the media device. Remove previous
versions before inserting the media device into the HE265-DEC USB interface.
3.
Safely remove the media device from your PC.
4.
Insert the media device into the USB interface on the HE265-DEC
5.
The fan and top blue LED will go off once the system mounts the media device and starts the
upgrade script. The disk mount and script start takes about 10 seconds. The upgrade will take a
little over a minute to complete. The device will reboot automatically.
6.
You can remove the USB media device from the HE265-DEC after the unit reboots and starts
decoding.
7.
To confirm the update was successful:
i.
Check the firmware version on the Web UI on the right side just above the tabs. The
version should reflect the name of the firmware file loaded onto the USB media device.
ii.
Insert the USB media device into your PC and open the firmwareUpdate log.
8.
If more that one unit is upgraded using the same USB media device, there will be a firmware
update log for each unit. The naming scheme for the firmware update log is as follows.
<SN>-firmwareUpdate.log
Figure 17: FW version page example
Figure 18: Firmware Update Log
