Z3 Technology EIB-UAV-01, Быстрый старт

Страница: 7 / 15

7
Z3 C onfidential
EIB-UAV-01 (DCK-15) UART’s
CONFIDENTIAL DOC-USR-0220-01
EIB-UAV-01 (DCK-15) UART’s
CONFIDENTIAL DOC-USR-0220-01
____________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N. 8th St. STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
3.0 Connectors further defined
3.1 Front End Board J1 and J2 Interface
The pin assignments of J2 (and J1 on the FV2K board) are shown in the table below.
Please note that the pin numbering of J2 on the Interface Front End PCB is
opposite of that on the
Sony FCB-EV7520 camera, so that it provides a straight through pass.
Pin
(J2)
Pin
(EV7520)
Signal Notes
1 30 TXOUT4-
Video output from camera to encoder
2 29
3 28 TXOUT5-
4 27
5 26 RESETn Camera reset signal from encoder
6 25 BMODE
7 24 TXOUT6-
Video output from camera to encoder
8 23
9 22 TXOUT7-
10 21
11 20 GND
12 19 GND
13 18 DC Input
+12V Power from encoder to camera.
Power comes directly from DC input
jack or PoE module, whichever is active.
14 17 DC Input
15 16 DC Input
16 15 DC Input
17 14 DC Input
18 13 UART_TXD VISCA UART, CPU TX to camera RX
19 12 UART_RXD VISCA UART, camera TX to CPU RX
20 11 GND
21 10 TXOUT0-
Video output from camera to encoder
22 9
23 8 TXOUT1-
24 7
25 6 TXOUT2-
26 5
27 4 TXCLKOUT-
28 3 T
29 2 TXOUT3-
30 1
Table 1 IFE PCB J2 and Sony EV7520 Pin Out
3.1.1 Frontend Board Flexible I/O Connector (FV2K and FSDI Boards Only)
The FlexIO connector on the FV2K and FSDI boards provide a versatile interface with many different I/O
functions, including digital and composite video input path, control path, serial ports, etc.
These pins connect directly to the FPGA on the board, so their functions and I/O standard are determined by
the FPGA programming applied.