Z1 Motorsports EcuTek Скачать руководство пользователя страница 7

Страница: 7 / 7

P a g e

| 7

Revision B

6/30/2022

When prompted, turn the ignition off. Wait a few seconds, and when prompted again, turn the
ignition back on.

DO NOT

start the engine during this time, just turn the key to the “ON”

position. For push button cars, ensure the brake pedal is not depressed when doing this.

Once complete, you will be shown a

Programming completed successfully!

message.

Select close, and you can now start your vehicle and take it for a test drive.

END

Additional Technical Support:

Contact Z1 Motorsports at

Or call 770-838-7777 between 9am and 6pm ET

Содержание EcuTek

Страница 2: ...Quantity Description 1 1 Z1 by EcuTek Bluetooth Connector GETTING STARTED 1 Install the ECU Connect app on your iOS or Android device 2 Open the app On its first use you will need to select your tuner Type in Z1 in the search bar then select Z1 Motorsports ...

Страница 3: ...your Z1 x EcuTek Bluetooth connector into your car s OBD2 port Turn the ignition key to the ON position but do not start the engine for push button cars press the start button without depressing the brake pedal 5 Select Continue and follow the prompts on your device to go through the Bluetooth pairing process and setup a PIN 6 The setup process is now complete ...

Страница 5: ...he EcuTek Bluetooth connector is plugged into your vehicle and the ignition is in the ON position 2 Open the My car section of the ECU Connect app and then select the Program ECU option 3 Select which ECU you want to program in this case Engine Then select which ROM file you want to program ...

Страница 6: ... 6 30 2022 AB 4 Select Program and then Start Test to begin the communication test This will take 5 minutes to complete then select Continue 5 Now it is time to flash the ECU select Program once again to begin the process ...