INSTALLATION
Unscrew the back cover of the motion sensor and insert 4 AAA rechargeable
batteries or use the USB power adapter included in the box.
WAIT!
Include the indoor sensor to your Z-Wave network before mounting it.
Z-WAVE INCLUSION
1. Bring the motion sensor within 3 feet from your Z-Wave gateway controller
2. Put your Z-Wave controller in inclusion/pairing mode
3. Press and release the Z-Wave button on the siren TWICE quickly (to lock
and unlock it)
4. A new motion detection device should appear on your controller’s device
list
Q:
I have not been able to add the device to my network after several
attempts, what do I do now?
A:
If you are unable to include the Z-Wave switch to your controller, please
try one of the following:
- Bring the siren closer to your Z-Wave controller
- Press and release the Z-Wave button quickly several times once you put the
controller in the inclusion mode to ensure the command has gone through
- Put your controller in the EXCLUSION mode and press and release the
Z-Wave button quickly 3 times, then try adding it to your network again
WELL DONE!
You have picked the finest solution for your smart home, congrats!
Now it’s time to enjoy these great features of your new product:
- Motion detection and wireless notifications (when included to a Z-Wave
gateway controller)
- Z-Wave Plus with improved 500 chip for faster and safer wireless commu-
nication
- Two alternative power sources:
4 AAA batteries or mini USB cable (DC 5V / 1A)
- May be associated and grouped with other Z-Wave devices for advanced
home automation
- Modern design will compliment any interior
SPECIFICATIONS
Model Number: ZSE02
Z-Wave Signal Frequency: 908.42 MHz
Detection Radius: 110° / 16-23 feet
Power: DC 5V/1A or 4 AAA (1.2V) batteries
Power Consumption: < 15mA when idle / < 38mA when active
Range: Up to 100 feet line of sight
Operating Temperature: 14 °F to 122 °F
Operating Humidity: ≤ 80%
Installation and Use: Indoor only
BEFORE YOU RETURN IT
Let us know if you are having any issues installing or operating the device.
Our fast and friendly tech support is here to help, every day of the year:
Go to
myzooz.com
to find out how to make your home smarter and safer.
WARNING
- Do not install the motion sensor in a place with direct sun exposure, high
temperature or humidity
- Keep away from chemicals, water, and dust
- Ensure the device is never close to any heat source or open flame to pre-
vent fire
- Ensure the device is connected to an electric power source that does not
exceed the maximum load power
5
6
7
8
Z-WAVE EXCLUSION
1. Bring the motion sensor within 3 feet from your Z-Wave gateway controller
2. Put your Z-Wave controller in exclusion/unpairing mode
3. Press and release the Z-Wave button on the siren TWICE quickly (to lock
and unlock it)
4. The device should disappear from your controller’s device list
Please repeat the process following all steps carefully if first attempt is un-
successful.
Z-Wave Automation and Advanced Functionality:
Once the Z-Wave motion sensor is added to your network, you are able to
trigger it with other components from your network, as well as control and
monitor its activity from your mobile device, or computer.
Depending on your Z-Wave gateway’s home automation software capabili-
ties, you may be able to associate your motion sensor in groups with other
Z-Wave devices to schedule scenes and create events.
Please refer to your controller’s user guide for advanced programming in-
structions as they are a little different for every software.
MOUNTING
Find the best spot for your Z-Wave motion sensor - a corner in the hall, base-
ment ceiling, or anywhere else you see fit. Use the 2 screws included in the
box to fix the mounting bracket to flat surface of your choice.
Once the bracket is securely installed, carefully slide the motion sensor onto
the bracket and position it by tilting it to either side, upwards, or downwards.
Z-WAVE BUTTON
Motion Sensor.indd 2
12/6/15 5:13 PM
