2
c)
Put the main body part into the hanging panel, keep the bottom line horizontally aligning with location hole;
pull down to fix it.
3. Screw Fixing
a)
Take out the tapered screws and expansion tube from PE bag, and then take down the hanging panels of
door contact main body and magnet separately.
b)
Make location holes by scribing lines on fixed or movable door/window in parallel, keep the distance of
main body and magnet≤6mm.If on the wooden wall, twist the screws directly; while on the concrete wall,
use an electric drill to make aФ6MM hole, then insert the expansion tube into the hole.
c)
Make the smooth sides of hanging panels against the wall, and align the holes of hanging panels &
expansion tube; then twisting screws with cross screwdriver.
