2
Installation
Front Cover
LED indicator
PIR Sensor
Learning key/Tamper
Light Sensor
Wall-Mounted
The recommended position for wall-mounted detection is in the corner of a room,
mount the detection at the height of 1.8m from the floor. At this height, the optimum
detect range is up to 10m (32.81 ft). (FIGURE 3a) Also, in this position, the 110
degrees fan-shaped detection pattern can normally offer greater protection than
mounting on a flat wall.
FIGURE 3a
1. Use a screwdriver to undo the bracket.
2. Insert 3 AA-size 1.5V alkaline batteries to the battery compartment, ensuring
that correct polarity is put.
3. Hold the bracket in position and mark the two mounting holes. Drill the holes,
insert the plastic wall plugs and screw the bracket to the wall using the screws
supplied.
4. Engage the HSD-200Z detector to the bracket firmly.
(FIGURE 3b.)
FIGURE 3b
Ceiling-Mounted
The factory setting of HSD-200Z is to be wall-mounted. However ceiling-mounted is
a thoughtful option Everspring provides. Simply remove the Wall-PIR (FIGURE 4b)
then reload the Ceiling-PIR. (FIGURE 4c) and follow the instruction below.
The optimum detect range for ceiling-mounted detection is at the height of 2.5M (8.2
ft), which can provide the coverage range of 5m (16.4ft) X 360 degree (FIGURE 4a).
FIGURE 4a
○
1
○
4
○
2
○
3
○
5
