If your CIT is connected to the local network through the Ethernet jack:
Make sure your device that you are connecting to the CIT with also has Internet access,
then open your web browser, and navigate to:
http://findCIT.Z-WaveAlliance.org
If your CIT unit was found on the local network, the web page will look similar to this:
If your CIT was found, it will display two IP addresses as hyperlinks. The first IP address is
the CIT’s address on your local (customer) network – the Ethernet jack network. The
second IP address is the CIT’s built-in WiFi address. Click on the first hyperlink – in the
example above, it would navigate to http://192.168.1.236:8083
(The IP address vended
on your customer network will vary)
Note: The web server for the CIT is not on the default port 80, so once you have the IP
address, you must append :8083 to access the user interface of the CIT. The link at the
FindCIT website above takes care of this for you. In the above example, connecting to the
CIT via WiFi would be this complete URL: http://192.168.115.1:8083