How to adjust the cutting angle
90° angle adjustment
Set the positioning holder. Adjust the saw
guide gauge at 90
°
. Then, set it along with
base plate & saw guide plate. Make final
angle adjustment and fix with hex screw.
Set the positioning holder. Insert the
dummy plate into the saw guide plates. Set
the saw guide gauge along with positioning
holder & dummy plate. Make final angle
adjustment and fix with hex screws.
Loosen screw 2. Set the matching mark of
bracket 3 on the 60
°
of bracket 2. Then fix
saw guide gauge at 60
°
and set it along with
positioning holder & saw guide plates.
Make final angle adjustment and fix firmly.
Loosen screw 1 first. Set the matching mark
of bracket 2 on the 45
°
angle of bracket 1 an
fix it. Set the saw guide gauge 45
°
and set it
along with base & saw guide plate like
illustration 1. Make final angle adjustment and
fix with hex screw.
Insert saw blade into the gap between guide
plates, then loosen height adjustment knob
slightly. Recommended clearance between the
surface of cutting object and the saw blade
teeth is approx. 6-8mm (1/4-5/16”). Then fix the
height of saw guide plates.
Bracket 3
Bracket 1
Bracket 2
Graduation
line
Matching mark
(notch)
BASE PLATE
ANGLE BRACKET
SAW GUIDE GAUGE
GUIDE FENCE
DUMMY PLATE
SAW GUIDE
PLATE
POSITIONING HOLDER
Angle bracket
Fixing screw
Graduation
line
SAW GUIDE
PLATE
FIXING SCREW
BASE PLATE
BLADE INSERT
POSITION
ANGLE BRACKET
Bracket 2
Matching mark
(notch)
T-SHAPE HEX WRENCH
Base plate
Bracket 3
Standard 90
°
Bracket 1
Bracket 2
Screw 1
Screw 2
Graduation
line
Matching mark
(notch)
45° angle adjustment example
Compound angle adjustment
Matching mark
(notch)
Graduation
line
60° angle adjustment example
６～８ｍｍ
Height adjustment
knob
Ｗ
ood
Square timber
Wide board
Parallel sliding holder
Clamp
Ａ
Ｂ
Guide fence
Wide board
90
°
90
°
Square timber
Square timber
Parallel sliding holder
Clamp
Rule or straight
wood
Variation of “Perfect Saw Guide, Free Angle”
Square Cut
Compound cutting 45
°
90
°
45
°
Any angle
Any angle
Any angle
Guide fence
Guide fence
Right & Left angle cutting 45
°
90
°
45
°
Guide fence
Rule or straight wood
If the brackets become difficult to adjust, you can loosen them by
applying some lubricant to the pivots.
FIXING SCREW
Illustration 1
Z-SAW CARPENTRY 265
Match the triangular marks on the
angle bracket & the base plate.
Then, fix with hex screw.
Set the matching mark of Bracket 2
on the line of 90
°
angle of bracket1.
Then fix it.
Set the matching mark of Bracket 3 on
the line of 90
°
angle of bracket 2 Then
tighten slightly.
Handle can be reversed to provide hand clearance.
Illustration A shows right-handed use
and B is for left-handed.
When cutting square timber, hold
the saw guide in position firmly
by hand with the guide fence.
For cutting wide board, clamp rule or straight
wooden piece. Set parallel sliding holder along
the rule, then start sawing slowly by moving
the saw guide backward.
When cutting square timber, hold
the saw guide in position firmly
by hand with the guide fence.
For cutting wide board, clamp rule or straight
wooden piece. Set parallel sliding holder along
the rule, then start sawing slowly by moving the
saw guide backward.
When cutting square timber, hold
the saw guide in a position firmly
by hand with the guide fence.
Height adjustment
of guide plate
