background image

 

Perfect Saw Guide, Free Angle 

Instructions for use 

TFE200508A 

45° 

90° 

 KNOB 

T-SHAPE HEX WRENCH      

Package Contents 

 

GUIDE FENCE

      … for cutting square timber 

 marked parts are packed 
in a Vinyl envelope

.

 

SPARE SCREW 
SPARE WASHER

 

DUMMY BLADE

Saw teeth should always stay 
clear of the saw guide plates.

 

Saw teeth will be seriously 
damaged by contact with 
saw guide plates. 

This furniture was actually made using the Z

-SAW CARPENTRY 265 

& Perfect Saw Guide. 

THIS SAW IS SPECIALLY DESIGNED AND PRODUCED TO 
MAXIMIZE THE CAPABILITY OF THE "PERFECT SAW 

ADVANTAGES OF Z-SAW CARPENTRY 265 

THE HIGHEST QUALITY BLADE IS DURABLE, FLEXIBLE AND RUST RESISTANT.

   

SPECIAL CUTTING EDGE DESIGNED FOR RIP, CROSS & SLANT CUTS.

 

EASY & QUICK REPLACEMENT BLADE STYLE (Convenient for tool box storage).

 

NON-SLIP ELASTOMER COVERED GRIP HANDLE.

 

Cutting on the pull-stroke 
prevents the blade from 
buckling and binding, and 
allows the blade to be thin. 
The thinner blade removes 
less material, makes sawing 
easier, faster and more 
accurate! 

45°

45° 

45° 

90°

Great Features: 

This innovative adjustable-angle saw guide is designed exclusively for use with Z-SAW CARPENTRY 265 saw.   
Quick and very easy angle adjustment for sawing at any angle between 45° right & 45° left as well as between 45

°

forward & 45° backward inclined.   
The rigidly and precisely constructed steel-made adjustable angle saw guide ensures accurate straight cuts, and it 
can be held in position firmly by hand or supported with positioning clamps. Equally suited for left- and right-hand 
use.  
Long straight cuts on wide boards are also easily made by using the parallel sliding holder.   
Special Saw Guide Gauge and Dummy Blade for exact angle adjustment are included.   

Oh, did you really make these yourself? 

Vertical angle bracket 

Spacing 
plate 

Guide plate   

fixing screw 

Height  
adjusting 
knob 

Base plate 

Vertical angle fixing screws 

Guide Plate   

Height adjusting nut 

Assembly 

 PARALLEL SLIDING HOLDER 

     

… for cutting wide board

 

CUTS ON 

THE PULL 

STROKE 

Horizontal angle 
adjusting screw 

Rotating base part of angle bracket is 
pre-set at factory. Do not attempt to 
adjust this screw. 

Okada Hardware Mfg.Co.,Ltd. 

561 Omura, Miki-shi, Hyogo, Japan 673-0404 

TEL: 81-794-83-1111 / FAX: 81-794-83-5111 

URL: http://www.z-saw.co.jp    E-mail: [email protected] 

M o d e l : 2 6 5  

Type             Medium-Fine    
Overall Length    445mm(17-½”)  
Blade Length     265mm(10-½”)  
Blade Thickness    0.60mm(0.024”) 
Kerf                          0.92mm(0.037”) 
Pitch                        14TPI                   

               

Thank you for your purchase of Perfect Saw Guide Free Angle. 
Please read these instructions carefully and keep them safely for future 
reference.

 

Caution 

  Do not overtighten hex screws, as doing so is likely to damage hex screw or 

the special T-shape hex wrench. 

  Saw teeth should always stay out of the saw guide plate.   

See pictures

 

   

  Do not overtighten the knob   

 

Wear safety goggles. 

 

Notice 

  Specification may change without notice to improve quality. 

  Copyright © Okada Hardware Manufacturing Company Limited.

                         

SAW GUIDE GAUGE

…for angle adjustment

 

Insert the saw blade into the 
handle deeply enough to 
cover the end of the slit in 
the blade. Tighten the 
screw. 

Отзывы: