Z GRILLS ZPG-5502H, Руководство пользователя

Страница: 12 / 24

10
2.INSTALLING THE CHAMBER HANDLE TO THE LID
1. Lift the Grill Assembly, turn, and place on the floor.
2. From the inside of the raised lid, push the Bolts (F) through the gaskets (D) and then
through the lid (11) and Handle Guide (10). Handle should sit inside the depression in the
guide. Thread Bolts (F) into Handle (9) and tighten with Wrench (B).
3.INSTALLING THE SMOKESTACK AND CHIMNEY CAP
1. Use Bolt (F) through the holes of Smoke Stack (14) and Smoke Stack Gasket (15),
align the hole of grill body, then attach the Gasket (D) and Hexagon Nut (E). Finally use
Wrench (B) to tighten them. As shown.
2. Tighten the Chimney Cap (13) on the Smoke Stack Assembly (14). Note that the chimney
is vertical and then tightened.