Z-EDGE X1, Руководство пользователя

Страница: 16 / 20

13
· Firmly press adhesive mounts into place and ensure full contact over the entire
surface.
Attach adhesive mounts in room temperature conditions. ·
Loop the circular ring of the Tether over the thumbscrew of the camera housing ·
and attach the other end to a secure anchor point. This will help prevent losing
the camera if it accidentally releases. To avoid injury do not use tether if
attaching camera to a helmet or other personal protective gear.
Mounting Accessories
· 2x Velcro Straps
2x Buckle Straps
·
4x Cable Ties ·
1x Tether ·
2x Replacement Adhesive Pads ·
1x Waterproof Data Cable ·
1x Cleaning Cloth ·
Note: To securely attach a mount please ensure you read the following instructions
below:
Attach adhesive mounts 72 hours before use (24 hours minimum) to ensure a ·
strong bond.
Adhesive mounts must be mounted on smooth surfaces to ensure a proper bond. ·
Apply adhesive mounts to clean surfaces only - wax, oil or dirt will weaken the ·
bond.