Fast axis belt skipping
teeth / chattering
Fast axis belt too loose
+
Tighten Fast Axis belt to proper tension
Can’t find printer on
network
Poor Ethernet connection or improper setup
+
See 08606 Ethernet setup
procedure for instructions
Service Station out of cleaning fluid
+
Fill cleaning fluid reservoir
Powder build – up on service station cap
+
Clean service station cap
Pogo Pins contaminated or dirty
-
Clean Pogo Pins with alcohol swab
Print head not seated correctly
-
Re-seat pen and restart build
Pogo pin / pins are bent or broken
-
Change pogo card (See 08632 Benchwork manual)
Concentration of color binder too high
-
Bleed fluid system and verify correct color binder
concentration before restarting
Air bubbles in fluid system
-
Bleed fluid system (see users manual chapter 6)
Short Print Head Life
Contaminated binder
-
Flush fluid system with bleach solution, change
binder
Error 30004 message
Igus Ribbon cable disconnected at either end
+
Check Igus ribbon cable for proper connection
