Z-Light 6TX/16TX/26TX Intelligent Direct Modulated Optical Transmitter
www.z-band.com
All Rights Reserved © 2018 Z-Band Technologies, LLC.
Phone: (866) 902-2606
- 2 -
FAX: (717) 249-3253
Provide the Required Power sources:
Operate this equipment only from the type of
power source indicated on the rear panel. CAUTION: For continued protection against
risk of fire, replace the fuses (if necessary) with only one of the same type and rating.
Adequate Grounding and Power Polarization:
This equipment is equipped with
polarized AC line plugs (a plug having one blade wider than the other). This plug will fit
into the power outlet only one way as a safety feature. Do not defeat the safety purpose
of the polarized plug.
INSTALLER NOTE:
This reminder is provided to call your attention to guidelines for
proper grounding. Specifically the cable ground shall be connected to the building
grounding system, as close to the point of cable entry as practical. The equipment
enclosure ground must also be attached and a ground screw connection is provided on
the rear of the equipment enclosure for this purpose.
Servicing:
Refer all servicing to qualified personnel. Opening or removing covers may
expose dangerous voltages. THESE TRANSMITTERS DO NOT HAVE USER
SERVICABLE INTERNAL PARTS
– DO NOT OPEN THE TRANSMITTER CABINET.
When replacement parts are required (the replaceable power supplies), make sure the
service technician uses only replacement parts provided by Z-Band Technologies, LLC.
(available from Z-Band Technologies-Authorized Distributors) and to SERVICE ONLY
WHEN POWER HAS BEEN DISCONNECTED. Unauthorized substitutions may result in
fire, electric shock, or improper operation of the unit and void all warranties.
Optical Output Safety: 1310nm and 1550nm Optical Transmitter units may emit
harmful invisible laser radiation. These products may emit harmful laser radiation
if powered on and the case is opened or
the optical path is exposed. DANGER: DO
NOT WORK ON THE OPTICAL PATH,
CONNECTIONS, ETC WHEN
TRANSMITTER POWER IS ON.
Laser Safety Information:
Viewing the laser output with (or even without instruments) may pose an eye hazard.
Laser power could be accessible if optical connector is open or fiber is broken.
CAUTION: Lasers may be on whenever the transmitter is powered.
CAUTION: Use of controls, adjustments, and procedures other than those
specified herein may result in hazardous laser radiation exposure.
DANGER:
1310nm and 1550nm Optical Transmitter units may emit harmful
invisible laser radiation. These products may emit harmful laser radiation if
powered on and the optical path is exposed or the case is opened. DANGER: DO
