Loosen the two bolts of the
LED Junction-box and
release the Junction-Box.
PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION
INSTALLATION GUIDE - INSTRUCTION MANUAL
Parking Garage Light - PGL
NOTICE
INSTALLATION - ON CEILING PENDANT
Parking Garage Light - PGL
Page 1 of 2
YYZ Lighting Inc., 1175 Squires Beach Rd, Unit 2, Pickering, ON L1W 3V3, Canada. www.yyzlighting.com
1
1)
Install the junction box to
ceiling pendant position.
2)
Have a licensed electrician
uses the correct installation
tools to install the
Junction-box and install the
power line properly.
3)
Check that the power line
is properly installed and
tighten the two bolts of
the screw.
4)
2
3
4
To prevent personal injury or product damage, only licensed electricians should install.
To avoid electric shock or component damage, disconnect power before attempting installation or servicing.
This product must be installed in accordance with the national electric code (NEC) and all applicable federal, state and local electric codes
and safety standards.
Disconnect product and allow cooling prior to servicing.
Any alteration or modification of this product is expressly forbidden as it may cause serious personal injury, death, property damage and/or
product malfunction.
To prevent product malfunction and/or electrical shock this product must be properly grounded.
This luminaire is designed to operate in ambient temperatures ranging from -30°C to 40°C and to be horizontally mounted with the LEDs
facing down.
1/2 inch
1/2 inch
!
INSTALLATION - ON CEILING WITH TRUNNION MOUNT
Remove two bolts of the
Trunnion Mount and
release the Top Trunnion
Mount.
1)
Install the Top Trunnion
Mount to the ceiling.
2)
Have a licensed electrician
uses the correct installation
tools to install the power
line properly.
3)
Check that the power line
is properly installed and
tighten the two bolts of
the screw.
4)
1
2
3
4
INSTALLATION - ON CEILING
Loosen the two bolts of the
LED Junction-box and
release the Junction-Box.
1)
Install the junction box to
ceiling position.
2)
Have a licensed electrician
uses the correct installation
tools to install the
Junction-box and install the
power line properly.
3)
Check that the power line
is properly installed and
tighten the two bolts of
the screw.
4)
1
2
3
4