INSTALLATION WITH ADHESIVE TAPE
INSTALLATION WITH STAINLESS STEEL MOUNTING CLIP
INSTALLATION WITH SILICONE MOUNTING CLIP
Page 2 of 3
LFW Series
YYZ Lighting Inc., 1175 Squires Beach Rd, Unit 2, Pickering, ON L1W 3V3, Canada. www.yyzlighting.com
LINEAR FLEX WASHER - LFW SERIES
INSTALLATION MANUAL
Take the product from the packaging box
and tear off the tape on the back.
Connect the product to the low-voltage driver
and energize it.
Install the product on where needed (ensure
the wall is smooth) and srick it firmly.
(refer to the installation diagram of mounting
distance for the specific glowing effect)
Take the stainless steel mounting clips and
screws from the packing box, and use a
screwdriver to install these clips where
needed.
Connect the product to the low-voltage driver
and energize it.
Take the light out of the box, then put the light
installation
into the clips and secure it (refer to the
distance diagram for the specific glowing effect).
Place the light where needed( refer to the
installation distance diagram for the specific
glowing effect).
Connect the product to the low-voltage driver
and energize it.
Take the silicone mounting clips and
screws from the package box, and fix these
clips with a screwdriver.
