Owner's Manual
TX160 High Gear
™
S2
™
ATV Trailer
Check for parts online at
www.yutrax.com
or call 800-345-6007 M-F 8-5 CST
Page 4
TONGUE ASSEMBLY
9. Assemble the bent hitch tongue (24804) and the center
hitch tongue (24803) by lining up the triangular hole
pattern and fastening (1) M8 x 60mm bolt and (1) M8
flange nyloc nut through the single hole closest to the end
of the center hitch tongue. SEE FIGURE 7.
10. Find the latching mechanism (24807) in your parts bag
and place on the center hitch tongue over the pair of
holes so that the handle is facing toward the hitch pin.
The bent hitch tongue should bend away from the surface
you are placing the latch onto. Fasten the latch onto the
center hitch tongue using (2) M6 x 65mm bolts, (2) M6 flat
washers, and (2) M6 flange nyloc nuts. SEE FIGURE 7.
11. Assemble the pivoting hitch tongue (24800) to the open
end of the center hitch tongue using (1) M10 x 70mm bolt
and (1) M10 flange nyloc nut. SEE FIGURE 7.
12. Fasten the tongue assembly to the axle by placing the
pivoting hitch tongue section into the center bracket of
the axle and fastening with (1) M10 x 65mm bolt and (1)
M10 flange nyloc nut. SEE FIGURE 8.
The unit can now be turned over onto the wheels for the
final assembly steps. Be careful for the loosely swinging
hitch bar, as it is not yet secured in place.
13. With the basket set in the dump position, and the hitch
bar set on the ground, find the latch plate (24806) in your
parts bag. Attach the latch plate to the front trailer frame
at the two holes on the bottom tube. Using (2) M6 x
40mm, (2) M6 flange nyloc nuts, and (2) M6 flat washers,
fasten the plate to the front of the frame. SEE FIGURE 9.
14. The hitch tongue can now be attached to the hitch of your
ATV with the hitch pin (25033) and hairpin style cotter
pin (12118). Making sure the hitch tongue is straight and
securely fastened to your ATV, the basket can be pivoted
down and locked into place. SEE FIGURE 10.
FIGURE 7
FIGURE 10
Bent Hitch
Tongue
Latching Mechanism
M8 x 60mm
M6 x 65mm
M6 Flat Washer
M10 x 70mm
M10 Flange
Nyloc Nut
Center Hitch Tongue
M6 Flange Nyloc Nut
M8 Flange Nyloc Nut
FIGURE 8
M10 Flange
Nyloc Nut
Tongue
Assembly
M10 x 65mm
FIGURE 9
M6 x 40mm
M6 Flat
Washer
M6 Flange
Nyloc Nut
Latch Plate
