Charging Pile Instructions-V2.0
20
9.3 Charging Operation Description
9.3.1 Charging Operation Instruction
1.
Homepage
Turn on the system power and after starting up, the system will initialize and enter the
homepage, as shown in figure 9.3.1.1.
Figure 9.3.1.1
2.
Startup Mode Selection
Users can choose different ways to start the charging pile:
Start by swiping card: Click the screen to select the charging mode, select the connector to
start charging, and follow step 3.
Setting method: enter the "setting interface" -- function setting -- startup mode, and select
start by swiping the card.
The charging pile can be started and stopped by using a charging card.
Start by button: Directly click the screen to select the charging mode, select the charging
connector and start charging, and follow step 3.
Setting method: enter the "setting interface" -- function setting -- startup mode, and select
start by button.
The charging pile can be started without card. Click the "start" and "stop" buttons on the
screen to start charging. The password of dynamic administrator is required.