YUPACK Ausense YS-A1, Инструкция по эксплуатации

Страница: 16 / 44

15
③
To tighten the adjustment there is a potentiometer button marked “TENSION”. Turn it in
the clockwise direction to tighten. If the strap does not tighten you need to adjust the
pendulum block and increase the power.
Note:
Do not adjust too much at once.
④
Width adjustment: This machine has a special design, 5 mm-15mm. All can be used
without changing any parts. If you need to adjust the strap insert hole, the spacing block of
outputting straps (refer to FIG 3-7) and the spacing block’s width of the outputting bottom
plate (refer to FIG 3-8). The machine has been set for 12mm straps as standard at the
factory.
Strap insert hole
Limit block width
exit limit block
FIG 3-7 FIG 3-8
⑤
The length of outputting strap adjustment: There is a potentiometer button, marked
“TIMER” on the switch panel; turn it in a clockwise direction, then the length of the strap
becomes longer.