80XX Series H.264 Digital Video Recorder User Manual ………………………………………………….V1.0
27
DEFAULT SETTINGS: Restore all the settings as the factory setting.
NOTE: make sure that the U drive and power is steady when it is upgradeing.
17 PTZ SETUP
Move the cursor to
【
PTZ SETUP
】（
Icon highlighted when selected
），
press
【
Enter
】
to enter into setting interface, you can setup the parameters for each channel separately.
With direction key or move cursor to the option, and press [Enter] to switch different
channels.
CHANNEL: The channel of PTZ connected.
PROTOCOL: select the protocol of different PTZ, there are two protocols to switch, and
the default is Pelco-D
BAUD RATE: select the different baud rate for your PTZ, there are 1200, 2400, 4800, and
9600
DATA BIT: there are 5,6,7,8 options to select, default setting is 8.
STOP BIT: 1 and 2 are optional, the default setting is 1.
VERIFY: there are None/Odd/Even/Mark/Space to select, the default setting is none.
ADDRESS: Fill the code of respective PTZ with relative channel.
