Yunlink CPE850D, Быстрый старт

Страница: 2 / 7

High Power and High Gain Antenna for more range
Designed in two line Power Amplifier on PCB board, the power can be 500mW high power, 15dBi MIMO
high gain antenna, greatly increase the Wi-Fi range to 6KM, supply the stable Wi-Fi signal for users.
LED Display make PTP/PTMP Connection simple
CPE-880D with LED display to show AP/Client operation mode, Channels, IP address and Signal
Strength; Easy to setup CPE-880D’s IP address, RF Power, Channels by press switch on product, no
need to access into GUI, avoid the complex setup program, simple to install it in different environment.
Power over Ethernet
CPE850D has integrated passive Power over Ethernet (PoE), for easy installation and lower cost. So it
can be installed in areas where power outlets are not readily available, eliminating the mess of altering
existing network infrastructure.
Access Controller System & Cloud Management System
With Access Control System under AP and Super WDS operation mode, easily access advanced
network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password,
upgrade firmware, backup and restore....
Main Features:

Comply with IEEE 802.11ac/a/n, 5GHz, 900Mbps Data Rate

1*10/100/1000Mbps WAN Port, 1*10/100Mbps LAN Port

500mW high power, build in 15dBi MIMO panel antenna, stronger signal strength, 6KM wireless
distance

Support 24V passive PoE

Support SSID broadcasting, Multi SSID up to 4

Support Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, Super WDS operation
mode

With WiFi channel analysis tool, choose the best channel to avoid Wi-Fi Interference.