- 2 -
Step 3: Insert SIM card (3G Model Only) and SD card
Step 4: Get camera working
1) Switch the 1st and 4th button to “ON”,
then press “OK” button, LED screen will
be lightened. Camera search signal
automatically
which
takes
around
30-40sec, then you will see the signal bar
displayed in the top left corner of LED
screen.
2) Camera will automatically enter MMS & 3G setups when the SIM card is inserted; If
"SIM
Automatch failed, pls enter setups manually"
pops up on screen, pls switch
“SIM Auto
Match”
to
“Manual”
mode, then enter MMS & 3G setups in
“Manual Setup”
;
3) For MMS, please enter your cellphone numbers in “Send to” “phone 1&2”;
For Emails, please enter your email address in “Send to” “email 1&2”.
Note: For detailed menu settings, please refer to instructions in Chapter 4.)
4) After you finish all setup, press “M” button to back to start screen, then press and hold “OK”
button for 3 seconds, LED screen will be turned off, and camera enter Motion detection
mode.
* In Motion Detection mode, camera will take photos and video clips automatically and send
photos to your cellphone or email upon each motion trigger.