User Manual of Ceiling AP
3
B. Powered by PoE Adapter,
The connection diagram showed as P1, internet cable connect to PoE adapter’s LAN Port, Ceiling AP’s WAN
port connect to PoE adapter’s PoE Port, then PC will access into ceiling AP through cable or wireless
P1
C. Powered by PoE Switch
The connection diagram shows as P2, Internet cable from PoE Switch to Ceiling AP’s WAN Port, then PC
access into ceiling AP wired/wireless.
Pls note, the PoE switch should support 24V Passive PoE or 802.3af 48V PoE, can supply power together with
data transmission.
P2
The operation mode and connection:
There are three operation mode: Gateway, Wifi Repeater, Wireless AP
Gateway:
The cable internet can be transmitted to wireless internet through PPPOE, Static IP, Dynamic IP. The
connection topology is showed as follows: Connect Internet cable to Ceiling AP’s WAN port, PC or end user
connect with Ceiling AP through wired/wireless.