25-07-01
Page 6 of 22
Operation Instructions for Leedz Free Standing July 2001.doc
CLEARANCES
The YUNCA LEEDZ FLUED GAS HEATER should be installed with clearances equal to
or greater than those recommended below and comply with NZS 5261/ AG601.
This is to ensure adequate air circulation around the heater and avoid heat damage to
wall coverings.
Note: If walled surface is incombustible i.e. brick or steel, side clearances may be
reduced by 100mm, and the back clearance to a minimum of 75mm. Corner positions
remain the same.
(See Fig. 3 Below)
(Fig. 3)
