Yum Asia Kumo YUMCARB YUM-EY10D, Руководство пользователя

Страница: 12 / 23

11
Kumo Multi-Function Rice Cooker by Yum Asia
3.5.3 SLOW COOK
For cooking stews and other dishes like curries, dhal, or other pulses/grains select the ‘SLOW COOK’
setting.
The default cooking time for the ‘SLOW COOK’ setting is 2 hours. You can adjust this up to 6 hours using
the + or - buttons in 5 minute intervals once you have selected the ‘SLOW COOK’ setting and the light
above is flashing (you can press and hold to skip the time on faster). After selecting the time, there is a 5
second delay and the cooking cycle starts. The appliance heats the contents of the inner bowl to a high
temperature (you will hear bubbling from the liquid), it then switches to a lower temperature for the
slow cooking. This is the same as the ‘auto’ setting on a conventional slow cooker.
Once the cooking cycle is complete, the appliance will make a sound and will automatically switch to
‘KEEP WARM’.
IMPORTANT – Do not exceed the maximum liquid marks on the inside of the inner bowl.
3.6 CANCELLING PROGRAMMES
To cancel a programme, you have selected or if you want to stop a programme part way through the
cooking cycle, you just need to press the ‘power’ button once. The appliance will then switch off. To
switch the appliance to stand-by when a cooking programme has been selected, press the ‘power’
button twice in quick succession.
3.7 HOW TO USE THE DELAYED START (PRESET) FUNCTION
The ‘PRESET’ function is a useful timer/delayed start feature; this allows you to set the appliance to have
your rice or food ready at a specific time.
The ‘PRESET’ function is available for all settings. To set the timer, press the button for the cooking
programme you want (for non-rice cooking programmes you can programme the length of cooking time
at this point). Then press the ‘PRESET’ button. The ‘PRESET’ indicator will then flash. By pressing the ‘+’
and ‘-’ buttons you can select how far in advance (in 5 minute increments) you want the cooking cycle
to finish. After setting when you want the food to be ready, there is a 5 second delay, and the cooker will
display the hours in advance you selected, start to count down and the cooking cycle will complete at
the time you specified.
If the preset/timer is set to below the minimum stated in the below table, the cooking cycle will start
immediately. This is because the default cooking time for each cooking cycle has to be taken into
account along with additional assessment time for the fuzzy logic to know what it is cooking.
Suggested timings for the ‘PRESET’ function
Function RICE PORRIDGE STEAM SLOW COOK
Preset
timings
70 mins to
24 hrs
70 mins to
24 hrs
1 hr to
24 hrs
130 mins to
24 hrs
Note – be aware that perishable foods should not be left for long periods of time when you have set the
‘PRESET’ function as they may spoil.
The start time of the preset/timer is not exact, it will come on slightly earlier as Kumo has to assess what
exactly is in the inner bowl (rice/oats/water) and volume so it can calculate the cooking time effectively.
It deals with this by turning the unit on early so it can ‘assess’ the contents.