background image

2. Installation

The terminal is a high-tech GPS positioning device, choose distributor suggested
professional installation company, mechanic to install and set-up;

Please follow the terminal installation order, DO NOT REVERSE, during the
installation, DO NOT POWER UP THE TERMINAL;

Suggest install in hidden places;

Please Note:

In order to keep it from theft’s damage, hidden place installation suggested;

Please avoid to install along with or near transmitter, ie: Reversing radar, other
anti-theft vehicle terminals;

Use ribbons to fasten the terminal, or strong double-faced adhesive tape;

The GSM and GPS antennas’ signal receiving side shall face the sky, and no
shield materials to block the signal, ie: metal; Also it shall avoid to interfere
signals, 2 antennas separate installation suggested;

Installation place suggested:

a) Within front decorated board under windshield;
b) Under Dashboard (avoid metal cover);
c) Within back decorated board under windshield;

Please Note:

Any metal heat shield layer or heating layer will reduce the signal of GPS, it may
cause GPS function failure, please adjust the installation place;

H.

Terminal wiring Instructions

H02

Содержание H02














Отзывы: