Yukon SUPER JACK SJ125, Руководство пользователя, Страница: 30 / 52

30
DRAFT CONTROL INSTALLATION
Insert the draft control in the open end of the stub.
Revolve it so it is right-side-up and imprinting on
control reads normally. See Fig. 9
To function properly, the draft control must be
mounted level and plumb in the tee joint stub.
Using a carpenter’s spirit level placed vertically
across the ring, position the draft control so it is
plumb and does not lean forward or backward.
(See Fig. 10) Also, place the spirit level horizontally
across the front, in line with the pivot pins and posi-
tion the control so it sets true (level). (See Fig. 11)
Tighten locking screw to hold draft control in place.
Installation
FIG. 9
FIG. 10
FIG. 11