Page 6
For technical questions, please call 1-888-866-5797.
Item 58832
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
8. Set the Sliding Partition (8) into place by inserting
the tabs at the end of the Partition into the holes
at the center of the Table Top’s underside.
Sliding
Sliding
partition (8)
partition (8)
Table Top (2)
Table Top (2)
Note:
Verify that the Sliding Partition and
Table Top face the same direction.
Sliding partition (8)
Sliding partition (8)
Table Top (2)
Table Top (2)
9. Use 4 x 30 mm Wood Screws (24) to
fasten the Sliding Partition to the middle
of the Table Top’s underside.
Leg
Leg
(1,3)
(1,3)
Table Top (2)
Table Top (2)
Sliding partition (8)
Sliding partition (8)
10. With assistance, set the assembled Legs and
Bottom Shelf onto the underside of the Table Top.
Note:
When setting down the assembled
Legs onto the Table Top, verify both Legs and
Table Top are facing the correct direction.
Table Top (2)
Table Top (2)
Leg
Leg
(1,3)
(1,3)
Note:
Verify that the Drawer guide slots on
the Sliding Partition face the same way as
the Drawer guide slots on the Legs.
11. Use the Hex Key and 6 x 50 mm Wood
Screws (15) to fasten the Legs to the Table
Top underside, using three Screws per side.
Leg
Leg
(1,3)
(1,3)
Table Top (2)
Table Top (2)
Screw (15)
Screw (15)
12. Use 4 x 25mm Wood Screws (22) to fasten
legs (1,3) to Table Top’s underside per side.
Table Top (2)
Table Top (2)
Leg
Leg
(1,3)
(1,3)
