•
Hunting & camping
•
Sports and night navigation and observation
•
Commercial and personal fishing and boating
•
Rescue, recovery, security and law enforcement
•
Surveillance and video recording in continuously changing light conditions from dawn to absolute
darkness
BATTERY INSTALLATION
1. Remove the battery compartment cover (1).
2. Pull out the battery container (3) using the attached strap (2).
3. Slide batteries into the battery container (3). Pay attention to «+» (positive) and «-» (negative) symbols
marked on the walls of the container.
4. Insert the battery container (3) back into the battery compartment. Make sure the battery container is
re-inserted properly particularly watching for the orientation of the battery container contacts.
5. Return the battery compartment cover (1) to its original position.
Attention! It is strongly recommended to use only SINGLE-TYPE batteries otherwise the
device's operating time drastically decreases.
OPERATING INSTRUCTIONS
1. Remove the lens caps from the objective lens (4) and from the long-range IR-illuminator (5).
2. Press the button marked «ON» (6) to turn on the device. A stable green light indicates that the device is
ready for use. A flashing green light indicates that the battery power level is low. A flashing red light indicates
that the battery is empty.
3. Locate an object within 20 to 30 meters.
4. Rotate the lever of the eyepiece (7) until you clearly see the frame of the display and black fine grid on
it. Adjust the sensitivity of the device (visually it is determined as image brightness) by turning the adjustment
wheel (11).
5. Rotate the objective (4) until you see a sharp image of the object. When you turn the device on, the
stealth short-range IR-illuminator is turned on automatically. Press the «IR» button (8) to turn the main long-
range IR-illuminator on. Choose the operation modes of the IR-illuminator: press and hold the «+» (9) or «-»
(10) buttons to increase or decrease respectively the power of the IR-illuminator. The use of the IR-illuminator
