.6.
Visit www.pmwfan.com
for further assistance.
Step 1 (Basic assembly of the fan)
Installation
①
②
Route all the wires from the motor the
down rod through. Fix the down rod to the
coupling with bolt,and then insert the
clevis pin.Last tighten the two screws on
coupling.
Decompose drown rod and remove the screws which are used to install the blades.
③
Assemble the canopy,coupling cover,and
hanging ball through the down rod.Then
insert the fixing pin, push the hanging ball
up, and fix it with screws.
Coupling
Clevis Pin
Bolt
Tighten the two screws
x 9
Remove the screws
