90
(NOTE: All operations only apply to I/O configured
models)
1. I/O Connection
a. Connect the
G (GND)
&
DO
pin to the external relay (buzzer) device.
b. Connect the
G (GND)
&
DI
pin to the external trigger device.
When no event occurs, the DO output is 5V (DO and GND are
disconnected). When the camera detects events it will trigger and
external alarm, DO output is 0V (DO and GND are connected).
If you select
N.O
on
Input sensor setting
, when the switch
contacts are opened, the camera input alarm will be triggered and
will execute the action user has set, for example, send a snapshot
to E-mail address.
vii.
I / O Configuration
Содержание YUC-KH26
