8.Auto scan
[120]+[CALL], call No.120 ,the lever of 360 degree clockwise automatic scanning
[121]+[CALL], call No.121,the lever of 360 degree anti-clockwise automatic scanning
[122]+[CALL], call No.122,the lever of 36 degree return automatic scanning
Modify the speed of auto-scan:[120]+[[N]+[PRESET], set No.120 set preset point N, N is for
Modify the speed of auto-scan:[120]+[[N]+[PRESET], set No.120 set preset point N, N is for 1-100, ( N stand for the lever
of speed ) default 10
°/
S
9.The inspection group programming
[115]+[CALL] call the first tour of 1-16 to scan
[116]+[CALL] call second tour of 17-32 to scan
[117]+[CALL] call the third tour of 33-48 to scan
[118]+[CALL] call the fourth tour of 49-64 to scan
[119]+[CALL] call the fifth tour of 65-80 to scan
modify the speed of tour
: set No.115 set preset N, N is for 1-100( N stand for the lever of the speed ) default 10
°/
S.
Modify the stay time of the tour
: set No.116 set preset No. N, N is for 1-250( N stand for time
）
default 5 second.
10.Left and right limit scan settings
The users can set left and right limit point in the range of the rotation, the speed dome can return scan in setting range
Set No. 110 preset [110]+[PRESET]: left limit , control speed dome to start rotation
Set No. 111 preset [111]+[PRESET]: right limit, control speed dome to rotation 30
°
Call
No.112 preset
[112]+[CALL]: start right and left limit scan
Set No.112 preset [112]+[PRESET]:save left and right limit scan
Modify the speed and right and left limit scan
: [110]+[CALL]+[N], CALL No.110 call preset N,N is for 1-100( stand the lever of
the speed ) default 10
°/
S.
11.Free action settings
[124]+[CALL], call No.124 preset : free action ON
.
[124]+[PRESET], set No.124 preset: free action OFF.
[125]+[CALL]+[N]+[CALL] ( N stand for corresponding preset point)
Free action settings:
Call No.125 call the corresponding preset ( need the corresponding function)
Default is No.1 preset
[125]+[[N]+[PRESET] ( N stand for time/S)
Start free action time settings:
Set No.125 set preset point N , N is for 1-250(N stand for time /S)
12.Boot action settings
[126]+[[N]+[PRESET] ( the corresponding function number in function sheet)
Set No.126 set the corresponding preset no. (need the corresponding function)
13.Set the first pattern scan
[134]+[CALL]+[ACTION](
operation the speed dome
)+[134]+[CALL]
This is the first pattern scan function. The users can call 134 preset to go into pattern scan mode , the speed
dome can automatic record to CPU, when the users move the PTZ or lens. If the record need stop, call NO.134 preset to save and exit.
Start the first pattern scan
: Call No.130 preset point.
14.Camera model settings( default automatic
recognition )
The users can defined the camera model by itself ’s. [127]+[[1-9]+[PRESET]
Set
No.127
preset
+
set
1-9
No.
preset,
No
.
1-9
preset
corresponding
to
SANSUNG/SONY/LG/HITACHI/LGE/SANYO/CNB/
SANSUNG2/SDM100)
15.Restore factory settings
Call no.93 preset number to clear content and restore to factory default. the all data will lose in this operation
.
16.Zoom magnification settings( Default SONY480)
When start IR light function ,auto-tracking function and zoom follow function, in order to make the best result of auto-tracking and IR
light . Please
match the lens of the camera ZOOM ratio with the speed dome .
Set the 104 camera lens moves to 1X and set the preset position 1+ camera lens move to 2X and set the preset
position 2... + camera lens moves to 20X and set the preset position N0.20 + set 104 end. (you can set up to 44 times)
Note:
If the user does not pursue the accuracy , it can be arranged at interval rate relation
,such as: 1.5.10.15.20