Yuchai YC310LC-8, Руководство по эксплуатации

Страница: 114 / 184

2. During storage
1) During storage, operate the machine once a month to make the surface of the moving parts
attached with a layer of the now film and charge the battery at the same time.
2) Run the air conditioning for the machine equipped with the air conditioning.
3) Turn the track.
3. Use recovery after storage
Before using the machine after long-term storage, please do according to the following steps:
1) Wipe off the grease coated on the surface of the cylinder piston rod.
2) Fill oil and grease to all the parts of the machine.
3) After long-term storage, the atmospheric moisture will enter the within the machine. Before or after
starting the machine, you have to check the oil of all parts of it. If there is water in the oil, replace all
the oil.
Note: 1) Under the condition of normal climate, the method above introduced can make the
excavator in storage for one year. However, after 6 months of the storage, you should
run all the parts of the machine without load for 15minutes, and at the same time, fill
lubricants to all the parts of it.
2) Before reusing the machine after long-term storage, you have to do the necessary
work and all the inspections. After the machine is stored for one year, you also have
to exclude the oil in the reducer and the hydraulic circuit and immediately make the
replacement.
Warning: If you must carry out the antirust operation to the machine stored
indoors, you have to open the doors and windows to promote the air circulation
and prevent the gas poisoning.
4-31