Yuba Dual Battery Bracket, Инструкция по эксплуатации

Страница: 6 / 8

Step 7: Install Both Batteries onto Spicy Curry V3
Step 9: Update the Software on the Bosch Motor
Step 8: Recycle/Repurpose extra hardware (If applicable)
Step 6: Apply the “Do Not Charge” Decal onto the Charging Port
A. Peel back protective cap on the Rear battery Port revealing the charging port. Apply
“Do Not Charge” decal onto the charging port. Decal should seal off the charging port.
Plug Spicy Curry into
Bosch Diagnostic
Software.
Update bike firmware
when prompted to
enable dual battery.
5