YuanDong GT2A, Руководство пользователя

Страница: 13 / 23

13
Instructions: Drive Sprocket & Crankshaft Gear Puller.
This tool is found in the engine kit tool bag:
It is used to remove both the output gear B-5 and the 10T drive sprocket.
To remove primary 10T drive sprocket secure sprocket from moving and remove nut. Screw in puller tool
to the threads in sprocket internal ID.
Tighten puller tool securely;
Hold tool with end wrench while
using ratchet on tool bolt to push
on the output shaft which causes the
sprocket to lift off the shaft.
To remove engine B5 gear; Secure clutch gear and remove slot head nut; Remove star washer;