YTTEK YTPC100 Series, Быстрый старт, Страница: 8 / 48

Page8 of 48
3.3 YTPC100 Platform Front Panel
Connector Use
USB 2.0
A JTAG interface that connects the host computer to the device FPGA for update
purposes. This port can be used with the Xilinx iMPACT configuration tool to load
a new bitfile provided by YTPC100 platform.
SMA
Tx1 Input or output terminal for the sub-6GHz RF signal on channel 1, 2, 3 or 4.
⚫
female SMA connector
⚫
50 Ω impedance
⚫
single-ended
Rx1
TX2
Rx2
TX3
RX3
TX4
RX4
RF DCI
A digital control signal interface that connects to the YTTEK RF module for beam-
forming realization. The part number of the connector is QTH-030-01-L-D-A
PWR Power on/off switch button with green light.