Rain volume
：（
0~999.9mm
）
•
Low battery indication
•
Blue LED background illumination
•
Main unit batteries: 3 x AA, LR6, 1.5V (not included)
Outdoor sensor:
•
Frequency: 433 MHz
•
Transmission range: 100 meters in open area.
** Actual distance may vary depending on the environment, it will be shortened in real
buildings due to electrical interference, concrete walls etc.
•
Batteries: 2 x AA, LR6 1.5V (not included)
Installation
•
Installing the Batteries
•
Open the main unit battery cover located at the back of the main unit and insert 3 pcs AA
batteries into the battery compartment and close the battery cover.
•
Pull away the shower proof casing of the thermo-hygro sensor to reveal the 2 sockets (the
sockets for the wind sensor and rain sensor )
•
1. Connect the wind speed sensor cable into the socket at the bottom of the of the wind
direction sensor
2. Connect the cable from wind direction and the cable from rain sensor to the
corresponding sockets of the thermo-hygro sensor by clicking them into place.
Make sure that rain and wind cables are connected to the correct sockets.
