- 8 -
STEP 1:
Attach Tongue Support
1. Attach the tongue support (#27) to the back of bottom panel (#1) using four sets of M6x12 screws
(#3), Ø6 lock washers (#4) and M6 hex nuts (#5). Note: the hole on tongue support (#27) should
be on right side.
STEP 2: Attach the Wheel Axle Support
1.
Put together the two wheel axle supports (#10) and attached them to the back of bottom panel
using six sets of M8x16 screws (#11), Ø8 lock washers (#12) and M8 hex nuts (#13).
Assembly Instructions
