HP45 controller V1.01 assembly guide
-Ytec3d.com-
Page 13
11:
Solder the 1.2k resistor
(R3)
on the back side of the primitive side.
12:
Solder the 220 resistor
(R11)
on the front of the primitive side.
13:
Solder the 2.2k resistor
(R1)
on the front of the primitive side).
14:
Solder 5x 2.2k resistor
(R6, R7, R8, R9, R10)
on the front of the address side.
15:
Solder the 5 pin header in the front of the address side. Cut wires on the bottom side of the
address side as close as possible to the board.
16: Solder the screw terminal on the front of the primitive side.
11
12
13
14
15
16
All manuals and user guides at all-guides.com